Adding Base Files

README.md

@@ -1 +1,4 @@
-# pi-box
+![piBox](/doc/pibox.png)
+
+# Raspberry Pi Birdbox
+A wooden birdbox with some extra gadgets courtesy of the Raspberry Pi. (Camera, IR, Weight)

bird.scad

@@ -0,0 +1,64 @@
+//bottom plank (red)
+color([1, 0, 0]) translate([12, 0, 0]) cube([194, 194, 12]);
+
+//back plank (blue)
+color([0, 0, 1]) translate([206, 0, 0]) cube([12, 194, 550]);
+
+//front plank (green)
+color([0, 1, 0]) cube([12, 194, 234]);
+
+//top plank (red)
+color([1, 0, 0]) translate([0, 0, 234]) cube([206, 194, 12]);
+
+//top plank (yellow)
+color([1,1,0]) translate([-25, -12, 221]) rotate(45, [0,1,0]) cube([12, 218, 325]);
+
+//bird section
+translate([0,0,0]) {
+    
+    //bottom plank (yellow)
+    translate([34, 34, 22]) cube([150, 150, 12]);
+    
+    //back plank (green) 
+    color([0, 1, 0]) translate([184, 34, 22]) cube([12, 150, 215]);
+    
+    //front plank (blue)
+    color([0, 0, 1]) translate([22, 34, 22]) cube([12, 150, 215]);
+};
+
+//side planks (turquoise)
+color([0, 1, 1]) translate([0, 0, 0]) {
+    
+    //left side (from front)
+    translate([0, -12, 0]) {
+        //square section
+        cube([218, 12, 234]);
+        
+        //triangle section
+        translate([0, 12, 234])
+        rotate(90, [1, 0, 0])
+        linear_extrude(height = 12)
+        polygon([[0, 0], [218, 0], [218, 218]]);
+    }
+    
+    //right side (from front)
+    translate([0, 194, 0]) {
+        //square section
+        cube([218, 12, 234]);
+        
+        //triangle section
+        translate([0, 12, 234])
+        rotate(90, [1, 0, 0])
+        linear_extrude(height = 12)
+        polygon([[0, 0], [218, 0], [218, 218]]);
+        
+    }
+    
+    
+};
+
+
+//hole
+color([0, 0, 0]) translate([0, 97, 196.5]) 
+    rotate(90, [0, 1, 0])
+    cylinder(34, 12.5, 12.5, false);

birddismantled.scad

@@ -0,0 +1,64 @@
+//bottom plank (red)
+color([1, 0, 0]) translate([12, 0, 0]) cube([194, 194, 12]);
+
+//back plank (blue)
+color([0, 0, 1]) translate([206, 0, 0]) cube([12, 194, 550]);
+
+//front plank (green)
+color([0, 1, 0]) cube([12, 194, 234]);
+
+//top plank (red)
+color([1, 0, 0]) translate([0, 0, 234]) cube([206, 194, 12]);
+
+//top plank (yellow)
+color([1,1,0]) translate([-25, -12, 221]) rotate(45, [0,1,0]) cube([12, 218, 325]);
+
+//bird section
+translate([0,400,0]) {
+    
+    //bottom plank (yellow)
+    translate([34, 34, 22]) cube([150, 150, 12]);
+    
+    //back plank (green) 
+    color([0, 1, 0]) translate([184, 34, 22]) cube([12, 150, 215]);
+    
+    //front plank (blue)
+    color([0, 0, 1]) translate([22, 34, 22]) cube([12, 150, 215]);
+};
+
+//side planks (turquoise)
+color([0, 1, 1]) translate([0, -400, 0]) {
+    
+    //left side (from front)
+    translate([0, -12, 0]) {
+        //square section
+        cube([218, 12, 234]);
+        
+        //triangle section
+        translate([0, 12, 234])
+        rotate(90, [1, 0, 0])
+        linear_extrude(height = 12)
+        polygon([[0, 0], [218, 0], [218, 218]]);
+    }
+    
+    //right side (from front)
+    translate([0, 194, 0]) {
+        //square section
+        cube([218, 12, 234]);
+        
+        //triangle section
+        translate([0, 12, 234])
+        rotate(90, [1, 0, 0])
+        linear_extrude(height = 12)
+        polygon([[0, 0], [218, 0], [218, 218]]);
+        
+    }
+    
+    
+};
+
+
+//hole
+color([0, 0, 0]) translate([0, 97, 196.5]) 
+    rotate(90, [0, 1, 0])
+    cylinder(34, 12.5, 12.5, false);