From b3229527ef1d2a02d60ddc3963fd72392330a0c4 Mon Sep 17 00:00:00 2001 From: Matt F Date: Sun, 19 Mar 2017 02:17:07 +0000 Subject: [PATCH] Fixed spacing in README.md --- README.md | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/README.md b/README.md index 66f3912..4ea6bb1 100644 --- a/README.md +++ b/README.md @@ -72,22 +72,32 @@ You can install OpenSCAD (http://www.openscad.org/downloads.html) to look at the #### Assembling #### Assembling the Distribution Board First cut all of the nessesary tracks like so ... + ![distributionboardbreadboard](/doc/circuitboards/distributionboardbreadboard.png) + Then solder on the wires and the sockets (UART is the 3 pin header, not the plug), then the cobbler. + ![distributionboard](/doc/circuitboards/distributionboard.png) #### Assembling the Force Sensor Board First cut all the tracks needed + ![forceboardbreadboard](/doc/circuitboards/forceboardbreadboard.png) + Then solder on the wires, the IC socket, the variable resistor and the plugs (2 pin) + ![forceboard](/doc/circuitboards/forceboard.png) #### Assembling the LED Boards First cut all the tracks needed + ![ledboardbreadboard](/doc/circuitboards/ledboardbreadboard.png) + After that solder on the resistors, the connectors and the NPN transistor ### THEN SOLDER THE LEDS ON ON THE OTHER SIDE OF THE STRIP BOARD + ![ledboard](/doc/circuitboards/ledboard.png) + (not 100% accurate)