matt/pibox
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fixed spacing in README.md

Browse Source
This commit is contained in:
Matt F
2017-03-19 02:17:07 +00:00
committed by GitHub
parent daf0e184b5
commit b3229527ef
1 changed files with 10 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
README.md
View File

@@ -72,22 +72,32 @@ You can install OpenSCAD (http://www.openscad.org/downloads.html) to look at the
#### Assembling
#### Assembling the Distribution Board
First cut all of the nessesary tracks like so ...
![distributionboardbreadboard](/doc/circuitboards/distributionboardbreadboard.png)
Then solder on the wires and the sockets (UART is the 3 pin header, not the plug), then the cobbler.
![distributionboard](/doc/circuitboards/distributionboard.png)
#### Assembling the Force Sensor Board
First cut all the tracks needed
![forceboardbreadboard](/doc/circuitboards/forceboardbreadboard.png)
Then solder on the wires, the IC socket, the variable resistor and the plugs (2 pin)
![forceboard](/doc/circuitboards/forceboard.png)
#### Assembling the LED Boards
First cut all the tracks needed
![ledboardbreadboard](/doc/circuitboards/ledboardbreadboard.png)
After that solder on the resistors, the connectors and the NPN transistor
### THEN SOLDER THE LEDS ON ON THE OTHER SIDE OF THE STRIP BOARD
![ledboard](/doc/circuitboards/ledboard.png)
(not 100% accurate)